만약 시험만 응시하고 싶으시다면 우리의 최신Microsoft 070-595자료로 시험 패스하실 수 있습니다. ITExamDump 의 학습가이드에는Microsoft 070-595인증시험의 예상문제, 시험문제와 답 임으로 100% 시험을 패스할 수 있습니다.우리의Microsoft 070-595시험자료로 충분한 시험준비하시는것이 좋을것 같습니다. 그리고 우리는 일년무료 업데이트를 제공합니다.
발달한 네트웨크 시대에 인터넷에 검색하면 많은Microsoft인증 070-595시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의Microsoft인증 070-595시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의Microsoft인증 070-595 실제시험 문제를 연구하여 만든Microsoft인증 070-595덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의Microsoft인증 070-595덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.
시험 번호/코드: 070-595
시험 이름: Microsoft (TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 57 문항
업데이트: 2014-02-13
영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인Microsoft인증 070-595시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. Microsoft인증 070-595시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의Microsoft인증 070-595덤프는 Microsoft인증 070-595시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.
ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Microsoft 070-595시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로Microsoft 070-595시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로Microsoft인증070-595험을 패스하실 수 있습니다,
ITExamDump에서 제공되는Microsoft 070-595인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 아니 거이 같습니다. 우리ITExamDump의 덤프를 사용한다면 우리는 일년무료 업뎃서비스를 제공하고 또 100%통과 율을 장담합니다. 만약 여러분이 시험에서 떨어졌다면 우리는 덤프비용전액을 환불해드립니다.
070-595 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-595.html
NO.1 A solution in Microsoft Visual Studio 2010 contains a test project with unit tests for a BizTalk Server 2010
schema.
When the test project is built, an error occurs that indicates that the tested schema does not contain a
definition for ValidateInstance or an extension method with this name.
You need ensure that the project builds in Visual Studio 2010 without errors.
What should you do?
A. Set Redeploy to False in the project properties for the schema project.
B. Set Enable Unit Testing to True in the project properties for the schema project.
C. Check Enable Code Analysis on Build in the project properties for the test project.
D. Sign the assembly with a strong name key in the project properties for the schema project.
Answer: B
Microsoft 070-595인증 070-595 dumps
NO.2 A BizTalk Server 2010 application sends purchase orders. Current applications use an existing mail
server to send mail. The purchase order application should use a distribution list that is managed by a
new mail server. Company IT policy does not allow you to create a new host for the new mail server.
You need to create a BizTalk port that sends orders to the email distribution list through the new mail
server.
What should you do?
A. Create an SMTP send port configured to send to the email distribution list. Specify the name of the new
mail server in Microsoft Internet Information Services (IIS) Manager.
B. Create an SMTP send port configured to send to the email distribution list. Create a filter on the send
port with the SMTP.SMTPHost context property equal to the new mail server.
C. Create a send port group with an SMTP send port configured to send to the email distribution list.
Create a filter on the send port group with the SMTP.SMTPHost context property equal to the new mail
server.
D. Create an SMTP send port configured to send to the email distribution list. Override the current SMTP
send handler settings by entering the new mail server in the SMTP server name field in the Handler
Override section of the port.
Answer: D
Microsoft최신덤프 070-595인증 070-595
NO.3 You are developing applications for BizTalk Server 2010. The application processes orders for two
vendors. These vendors have different message formats for their orders.
You define BizTalk schemas for both vendors in separate projects and name the projects VendorA and
VendorB. You promote the OrderType property in the schema of VendorA and the PurchaseType property
in the schema of VendorB. Then you deploy the application.
You need to log messages to disk for shoe orders for VendorA and bike orders for VendorB.
What should you do?
A. Add a FILE send port with the filter: VendorA.OrderType==Shoes Or VendorB.PurchaseType==Bikes
B. Add a FILE send port with the filter: VendorA.OrderType==Shoes And VendorB.PurchaseType==Bikes
C. Add a send port group with the filter: VendorA.OrderType==Shoes Or VendorB.PurchaseType==Bikes
D. Add a send port group with the filter: VendorA.OrderType==Shoes And
VendorB.PurchaseType==Bikes
Answer: A
Microsoft인증 070-595 070-595인증 070-595
NO.4 You are developing a solution for BizTalk Server 2010. You deploy the solution to the runtime
environment. The solution includes one orchestration with a direct bound send port that sends a message
to the BizTalk MessageBox database for routing to a folder.
After starting the BizTalk application for testing, you notice that the following error is logged in the servers
event log:
The published message could not be routed because no subscribers were found. This error occurs if the
subscribing orchestration or send port has not been enlisted, or if some of the message properties
necessary for subscription evaluation have not been promoted. Please use the BizTalk Administration
console to troubleshoot this failure.
You need to resolve the error without changing the code in the orchestration and without redeploying the
solution.
What should you do?
A. Add a dynamic send port.
B. Add a send port that has a filter that matches the message type.
C. Add a send port that uses the XmlTransmit pipeline.
D. Add a receive port that uses the XmlReceive pipeline.
Answer: B
Microsoft최신덤프 070-595 dump 070-595시험문제 070-595 dump
NO.5 A BizTalk Server 2010 application contains an orchestration with one receive port and one send port.
You evaluate the runtime behavior of the orchestration by viewing the promoted properties of any inbound
and outbound messages of the orchestration.
You need to modify the application so that you can view these promoted properties on the BizTalk Server
Group Hub page.
What should you do?
A. In Orchestration Designer, change the Type Modifier property to Public. Redeploy the orchestration.
B. In Orchestration Designer, change the Report To Analyst property to True. Redeploy the orchestration.
Create filters on the receive port receive location that evaluate the messages promoted properties.
C. In the BizTalk Administration console, modify the orchestration properties. Under Track Message
Properties, select the check boxes for incoming and outgoing messages.
D. In the BizTalk Administration console, modify the orchestration properties. Under Track Message
Bodies, select Before orchestration processing and After orchestration processing.
Answer: C
Microsoft 070-595 dump 070-595 070-595 070-595
NO.6 A BizTalk Server 2010 solution sends out XML invoices to a customer on a regular basis. The customer
has sent you the public key part of their certificate. You installed this certificate on the server and set up a
send port to use this certificate. The certification authority for the certificate is one that you already trust.
You need to ensure that all invoices sent to the customer are encrypted using the provided public key.
What should you do?
A. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Add signing
certification to message property of the component to True.
B. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Enable encryption
property of the component to True.
C. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Content transfer
encoding property of the component to Base64.
D. Create a custom pipeline that uses the default XML assembler component. Use the default values for
all properties of the component.
Answer: B
Microsoft dumps 070-595 070-595
NO.7 A supplier sends messages that they sign with a certificate to a BizTalk Server 2010 application.
You need to ensure that the received messages are signed with the certificate.
What should you do?
A. Use the XMLTransmit pipeline.
B. Use the XMLReceive pipeline.
C. Use a custom pipeline that leverages the MIME/SMIME encoder component.
D. Use a custom pipeline that leverages the MIME/SMIME decoder component.
Answer: D
Microsoft시험문제 070-595 dumps 070-595 pdf 070-595 dumps
NO.8 A BizTalk Server 2010 solution contains a map that transforms an internal order format into the order
format of a supplier. You have examples of the internal order.
You need to perform unit testing to make sure that the map works.
You add a test project and a test class to the solution. You then add a reference to the project with the
map. What should you do next?
A. Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableMapBase class to test the map.
B. Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableSchemaBase class to test the schema.
C. Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.XLANGs.BaseTypes. Use the
TestableMapBase class to test the map.
D. Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableMapBase class to test the map.
Answer: C
Microsoft인증 070-595 070-595
NO.9 A company uses BizTalk Server 2010 to receive electronic orders from multiple customers. You have
schemas for all the order formats that the customers send.
You need to create a business process that handles an incoming order.
You create a canonical schema that represents an order. You also create an orchestration that handles an
order of the canonical schema. What should you do next?
A. Create maps from the canonical schema to each of the customer order formats. Create a send port and
bind it to the orchestration. Use the maps on the send port.
B. Create maps from the canonical schema to each of the customer order formats. Create a receive port
and location and bind the port to the orchestration. Use the maps on the receive port.
C.Create maps from each of the customer order formats to the canonical schema. Create a send port and
bind it to the orchestration. Use the maps on the send port.
D. Create maps from each of the customer order formats to the canonical schema. Create a receive port
and location and bind the port to the orchestration. Use the maps on the receive port.
Answer: D
Microsoft자료 070-595 070-595덤프 070-595인증
NO.10 A BizTalk Server 2010 application is designed to receive a file from a customer.
The customer periodically updates the file on an FTP site. The file has a name that never changes. You
have been given read-only permissions to the site.
You need to create a receive location that detects when the file has been updated and then retrieves it.
You use the BizTalk Administration console to create a receive port. What should you do next?
A. Create an FTP receive location and set the Mode property to Passive.
B. Create an FTP receive location and set the Target File Name property to *.*.
C. Create an FTP receive location with the site and credential information. In the FTP adapter properties,
set the Delete After Download property to No and set the Enable Timestamp Comparison property to Yes.
D. Create an FTP receive location with the site and credential information. In the FTP adapter properties,
set the Delete After Download property to Yes and set the Enable Timestamp Comparison property to
Yes.
Answer: C
Microsoft dumps 070-595자료 070-595 070-595 dumps 070-595자격증
ITexamdump의 LOT-927덤프의 VCE테스트프로그램과 000-503덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 M70-301시험에 대비한 고품질 덤프와 1Y0-300시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-408시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기