ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Symantec ST0-10X인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Symantec ST0-10X관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Symantec ST0-10X자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Symantec ST0-10X인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.
Symantec인증 ST0-10X시험준비중이신 분들은Symantec인증 ST0-10X시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.
시험 번호/코드: ST0-10X
시험 이름: Symantec (Veritas Storage Foundation 5 for Unix (STS))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 198 문항
업데이트: 2014-02-20
IT인증시험에 도전해보려는 분들은 회사에 다니는 분들이 대부분입니다. 승진을 위해서나 연봉협상을 위해서나 자격증 취득은 지금시대의 필수입니다. ITExamDump의Symantec인증 ST0-10X덤프는 회사다니느라 바쁜 나날을 보내고 있는 분들을 위해 준비한 시험준비공부자료입니다. ITExamDump의Symantec인증 ST0-10X덤프를 구매하여 pdf버전을 공부하고 소프트웨어버전으로 시험환경을 익혀 시험보는게 두렵지 않게 해드립니다. 문제가 적고 가격이 저렴해 누구나 부담없이 애용 가능합니다. ITExamDump의Symantec인증 ST0-10X덤프를 데려가 주시면 기적을 안겨드릴게요.
ITExamDump의 인지도는 고객님께서 상상하는것보다 훨씬 높습니다.많은 분들이ITExamDump의 덤프공부가이드로 IT자격증 취득의 꿈을 이루었습니다. ITExamDump에서 출시한 Symantec인증 ST0-10X덤프는 IT인사들이 자격증 취득의 험난한 길에서 없어서는 안될중요한 존재입니다. ITExamDump의 Symantec인증 ST0-10X덤프를 한번 믿고 가보세요.시험불합격시 덤프비용은 환불해드리니 밑져봐야 본전 아니겠습니까?
ST0-10X 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-10X.html
NO.1 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C
Symantec ST0-10X자격증 ST0-10X자격증 ST0-10X기출문제
NO.2 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C
Symantec자격증 ST0-10X덤프 ST0-10X dumps ST0-10X ST0-10X
NO.3 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D
Symantec시험문제 ST0-10X인증 ST0-10X ST0-10X덤프 ST0-10X
NO.4 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD
Symantec pdf ST0-10X인증 ST0-10X ST0-10X ST0-10X
NO.5 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B
Symantec ST0-10X ST0-10X시험문제 ST0-10X
NO.6 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C
Symantec최신덤프 ST0-10X시험문제 ST0-10X ST0-10X자격증
NO.7 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B
Symantec ST0-10X ST0-10X ST0-10X dumps
NO.8 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B
Symantec ST0-10X인증 ST0-10X ST0-10X
NO.9 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A
Symantec pdf ST0-10X dumps ST0-10X ST0-10X pdf ST0-10X기출문제
NO.10 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B
Symantec자료 ST0-10X인증 ST0-10X dumps ST0-10X
NO.11 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B
Symantec자료 ST0-10X덤프 ST0-10X ST0-10X최신덤프
NO.12 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A
Symantec인증 ST0-10X dumps ST0-10X ST0-10X dump ST0-10X ST0-10X dump
NO.13 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B
Symantec ST0-10X ST0-10X인증 ST0-10X덤프 ST0-10X
NO.14 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C
Symantec ST0-10X ST0-10X ST0-10X
NO.15 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D
Symantec ST0-10X pdf ST0-10X ST0-10X인증 ST0-10X시험문제 ST0-10X
NO.16 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D
Symantec ST0-10X ST0-10X인증 ST0-10X dumps ST0-10X pdf
NO.17 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE
Symantec덤프 ST0-10X pdf ST0-10X ST0-10X dumps
NO.18 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B
Symantec dump ST0-10X ST0-10X dumps
NO.19 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B
Symantec ST0-10X자격증 ST0-10X인증 ST0-10X ST0-10X
NO.20 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD
Symantec자격증 ST0-10X기출문제 ST0-10X ST0-10X시험문제 ST0-10X기출문제
ITexamdump의 LOT-406덤프의 VCE테스트프로그램과 ECP-102덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 350-029시험에 대비한 고품질 덤프와 HP0-J61시험 최신버전덤프를 제공해드립니다. 최고품질 70-466시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기