우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM 000-918시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.
우리ITExamDump 에서 여러분은 아주 간단히IBM 000-918시험을 패스할 수 있습니다. 만약 처음IBM 000-918시험에 도전한다면 우리의IBM 000-918시험자료를 선택하여 다운받고 고부를 한다면 생가보다는 아주 쉽게IBM 000-918시험을 통과할 수 있으며 무엇보다도 시험시의 자신감 충만에 많은 도움이 됩니다. 다른 자료판매사이트도 많겠지만 저희는 저희 자료에 자신이 있습니다. 우리의 시험자료는 모두 하이퀼러티한 문제와 답으로 구성되었습니다, 그리고 우리는 업데트를 아주 중요시 생각하기에 어느 사이트보다 더 최신버전을 보실 수 잇을것입니다. 우리의IBM 000-918자료로 자신만만한 시험 준비하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.IBM 000-918로 빠른시일내에 자격증 취득하시고IBMIT업계중에 엘리트한 전문가되시기를 바랍니다.
ITExamDump의 IBM인증 000-918덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 IBM인증 000-918덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희IBM인증 000-918덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
성공으로 향하는 길에는 많은 방법과 방식이 있습니다. IBM인증 000-918시험을 패스하는 길에는ITExamDump의IBM인증 000-918덤프가 있습니다. ITExamDump의IBM인증 000-918덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.
수많은IBM인증 000-918시험공부자료중에서ITExamDump의IBM인증 000-918덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의IBM인증 000-918덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의IBM인증 000-918덤프가 있으면 힘든IBM인증 000-918시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의IBM인증 000-918덤프로 시험준비 공부를 하는것입니다.
시험 번호/코드: 000-918
시험 이름: IBM (System Administration for IBM Informix Dynamic Server V11)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 125 문항
업데이트: 2014-04-14
000-918 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-918.html
NO.1 Which command would be used to monitor disk activity per chunk?
A. onstat -g iog
B. onstat -d
C. onstat -g iof
D. onstat -F
Answer: C
IBM인증 000-918 000-918인증
NO.2 You are receiving an error when trying to drop a chunk that you think is empty. Which command will
show you if any object is still allocating part of the chunk?
A. oncheck -pe
B. onstat -d
C. oncheck -cD
D. oncheck -cc
Answer:A
IBM dump 000-918 000-918 pdf
NO.3 When determining the physical log size, what should you consider?
A. RTO_SERVER_RESTART configuration parameter
B. DYNAMIC_LOGS configuration parameter
C. PHYSBUFF configuration parameter
D. LOGFILES configuration parameter
Answer:A
IBM최신덤프 000-918 000-918 000-918
NO.4 Which two parameters influence the total size of the resident portion of shared memory? (Choose
two.)
A. RESIDENT
B. BUFFERS
C. LOCKS
D. SHMBASE
E. PHYSBUFF
Answer: CE
IBM 000-918 dumps 000-918 dumps
NO.5 Which two protocols are used on a Linux platform for IPC connections? (Choose two.)
A. fast fiber
B. shared memory
C. stream pipe
D. named pipe
E. local loopback
Answer: BC
IBM최신덤프 000-918 dump 000-918 000-918자격증
NO.6 A user wants to save SQL explain output to the file: /tmp/myexplain.out. Which syntax should be used?
A. set explain on file to /tmp/myexplain.out
B. set explain on file /tmp/myexplain.out
C. set explain file /tmp/myexplain.out
D. set explain file to /tmp/myexplain.out
Answer: D
IBM 000-918자료 000-918 000-918인증 000-918 000-918덤프
NO.7 Click the Exhibit button.
In the exhibit, how does an IDS database administrator or programmer ensure that only committed data
will be seen and that no locking errors will occur?
<e ip="918-a-3.jpg"></e>
A. Change user 1 isolation level to dirty read.
B. Change user 2 isolation level to dirty read.
C. Change user 1 isolation level to committed read last committed.
D. Change user 2 isolation level to committed read last committed.
Answer: D
IBM인증 000-918 000-918 000-918자료 000-918 dumps
NO.8 Both standard and temporary dbspaces are listed in the DBSPACETEMP configuration parameter or
environment variable. Which rule applies?
A. Sort, backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space
exists.
B. Backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space exists. Sort temporary tables are specified by the PSORT_DBTEMP environment
variable.
C. Sort, backup, implicit, and non-logging explicit temporary tables are created in all available dbspaces if
adequatespace exists.
D. Explicit temporary tables created without the WITH NO LOG option are created in the root dbspace.
Answer:A
IBM 000-918 000-918 000-918 dumps
NO.9 Given the following message log information:
15.56:29 Physical Recovery Started at Page (1:1210).
15:56:29 Physical Recovery Complete: 147 Pages Examined, 10 Pages Restored.
15:56:29 Logical Recovery Started.
15:56:29 10 recovery worker threads will be started.
15:56:32 Logical Recovery has reached the transaction cleanup phase.
15:56:32 Logical Recovery Complete.
5 Committed, 2 Rolled Back, 0 Open, 0 Bad Locks
What would be the reason for the difference in 'Pages Examined' and 'Pages Restored' during physical
recovery?
A. The database server might physically log a page image multiple times between checkpoints.
B. The physical recovery restores only the first logged page image.
C. It is an expected behavior.
D. The physical log size is too large.
Answer:A
IBM 000-918 000-918 000-918 000-918
NO.10 Given the following 'onstat -g arc' information:
IBM Informix Dynamic Server Version 11.10.FC1 -- On-Line -- Up 45:18:13 -- 38912 Kbytes
num DBSpace Q Size Q Len Buffer partnum size scanner
Dbspaces - Archive Status
name number level date log log-position
rootdbs 1 0 02/11/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
dbs1 2 0 02/14/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
On February 16, 2007, at 1:00 PM, a chunk in dbspace bs1 encountered hardware failure.
Which method will restore all of the data, to the point of failure, to a replacement disk drive?
A. a level 0 and 2 restore followed by a logical log restore
B. a level 0 and 1 restore only
C. a level 0 and 1 restore followed by a logical log restore
D. a level 0, 1, and 2 restore followed by a logical log restore
Answer: C
IBM자격증 000-918 dump 000-918
NO.11 Click the Exhibit button.
Given the sqexplain output in the exhibit, which SQL statement will make the est_rows column accurate?
<e ip="918-a-1.jpg"></e>
A. update statistics high for table
B. update statistics high for systables
C. update statistics high for table orders
D. update statistics high for table customer
Answer:A
IBM 000-918 000-918 000-918 000-918
NO.12 Which type of backup and restore (BAR) utility would be suited for restoring a single table from a level 0
backup to a specific point in time?
A. onbar
B. ontape
C. archecker
D. onarchive
Answer: C
IBM자료 000-918최신덤프 000-918 000-918 000-918 pdf
NO.13 A database administrator uses the following onconfig parameters:
TAPEDEV = /foo/resdev
How will this affect ontape backup?
A. ontape will use the directory /foo/resdev if it exists for storage space backup.
B. ontape will use the definitions for TAPEBLK from the file /foo/resdev.
C. ontape will write an informational message to the file /foo/resdev.
D. ontape will use the definitions for TAPESIZE from the file /foo/resdev.
Answer:A
IBM 000-918덤프 000-918기출문제 000-918
NO.14 An Informix database server has been configured with the following parameters:
BAR_MAX_BACKUP 5
BAR_NB_XPORT_COUNT 4
BAR_XFER_BUF_SIZE 10
How many data buffers will be created during an onbar parallel backup attempt?
A. 50
B. 20
C. 40
D. 25
Answer: B
IBM 000-918자격증 000-918덤프 000-918
NO.15 You detected excessive memory usage that might be caused by a memory leak in the application.
Which twocommands would be useful in this scenario? (Choose two.)
A. onstat -u
B. onstat -g sql -r 120
C. onstat -g ses -r 60
D. onstat -g mgm
E. onstat -g mem
Answer: CE
IBM자격증 000-918 000-918시험문제 000-918
NO.16 The table called "state" has lock mode set to row within an unbuffered logged database. The onconfig
file has
USELASTCOMMITTED 'COMMITTED READ' set. One user session has run the following:
begin work;
select * from state where code = "AK";
update state set sname = "ALASKA" where code = "AK";
The results from the SQL select statement run by user one was:
AK Alaska
Session two runs the following (session one is still connected):
set isolation to dirty read;
select * from state where code = "AK";
What will session two see when they run the above SQL statements?
A. AK and Alaska
B. AK and ALASKA
C. Error code 244 and isam 107.
D. The session waits until user one is finished processing.
Answer: B
IBM dumps 000-918덤프 000-918 000-918 000-918
NO.17 Which two statements are true for an hierarchical routing topology when setting up SQLHOSTS
server group?(Choose two.)
A. Root and nonroot servers only need to maintain their leaf node server groups.
B. Root and nonroot servers must each maintain all server groups within the enterprise.
C. Enterprise Replication will transmit exactly the SQLHOSTS information, there is no need to maintain
them.
D. Each leaf server must have SQLHOSTS information only for itself and its parent.
E. SQLHOSTS entries for nodes that do not directly connect are not required.
Answer: BD
IBM시험문제 000-918자료 000-918 000-918 000-918 000-918
NO.18 Which memory area is used for log records for smart objects?
A. virtual portion of shared memory
B. logical log buffers
C. /tmp
D. DBSPACETEMP
Answer: B
IBM 000-918시험문제 000-918 000-918 000-918
NO.19 What will the setting "SQLTRACE level=LOW,ntraces=2000,size=2,mode=global" within the Informix
onconfig file record?
A. statement statistics, statement text, and list of table names
B. statement text, host variables, and statement iterators
C. statement statistics, statement text, and statement iterators
D. statement text, statement iterators, and database name
Answer: C
IBM 000-918최신덤프 000-918
NO.20 An IDS server has its LRU_MIN_DIRTY set to 1 and its LRU_MAX_DIRTY set to 2. Occasionally the
checkpointblocks user transactions from doing updates to the database for too long. How should the
database administrator correct
this situation?
A. Set onconfig parameter AUTO_CKPT to 1 and follow any advice in online.log.
B. Increase the number of page cleaners (i.e. flushers).
C. Increase the buffer pool size.
D. Set the onconfig parameter RTO_SERVER_RESTART to "on".
Answer:A
IBM자격증 000-918 000-918
ITexamdump의 70-414덤프의 VCE테스트프로그램과 VCAC510덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-663시험에 대비한 고품질 덤프와 MB6-886시험 최신버전덤프를 제공해드립니다. 최고품질 600-199시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기