ITExamDump는 여러분이 빠른 시일 내에Citrix 1Y0-A11인증시험을 효과적으로 터득할 수 있는 사이트입니다.Citrix 1Y0-A11덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서Citrix 1Y0-A11관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의Citrix 1Y0-A11덤프로 자신 있는 시험준비를 하세요.
Citrix인증 1Y0-A11 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. Citrix인증 1Y0-A11 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는Citrix인증 1Y0-A11 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.
시험 번호/코드: 1Y0-A11
시험 이름: Citrix (Basic Administration for Citrix NetScaler 9.0)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2014-04-27
ITExamDump 는 완전히 여러분이 인증시험준비와 안전이 시험패스를 위한 완벽한 덤프제공사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 제품의 완성도도 다릅니다.그 말은 즉 알 맞춤 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편안하게 패스할 수 있습니다.많은 it인증관연 응시자들은 모두 우리ITExamDump가 제공하는 문제와 답 덤프로 자격증 취득을 했습니다.때문에 우리ITExamDump또한 업계에서 아주 좋은 이미지를 가지고 잇습니다
Citrix인증 1Y0-A11시험을 어떻게 패스할가 고민그만하고ITExamDump의Citrix 인증1Y0-A11시험대비 덤프를 데려가 주세요.가격이 착한데 비해 너무나 훌륭한 덤프품질과 높은 적중율, ITExamDump가 아닌 다른곳에서 찾아볼수 없는 혜택입니다.
1Y0-A11 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-A11.html
NO.1 A NetScaler system is running with high CPU usage frequently. Which log can the administrator view
to determine if the high CPU is being caused by the processes running in the user space?
A.syslog
B.nswlog
C.newnslog
D.nsconmsg
Answer:C
Citrix 1Y0-A11자격증 1Y0-A11자격증 1Y0-A11기출문제 1Y0-A11 dump
NO.2 Scenario: An administrator set up a NetScaler system in a one-arm mode configuration with high
availability. The system failed over unexpectedly. Which two occurences could be causing this issue?
(Choose two.)
A.An interface is down
B.Layer 2 mode is disabled
C.An SSL acceleration card is down
D.The heartbeat is being sent every two seconds
Answer:A C
Citrix덤프 1Y0-A11 1Y0-A11 1Y0-A11
NO.3 Scenario: An administrator must set up a NetScaler system network with USIP mode enabled. The
NetScaler must be able to preserve client IP addresses in TCP/IP packets reaching the back-end servers
except for connections coming from particular IP addresses that are defined in an ACL. In the case of
connections coming from the IP addresses defined in the ACL, the packets reaching the back-end servers
should receive the NetScaler IP address instead of the client IP address. On which entity should RNAT be
configured to meet the requirements in this scenario according to best practices?
A.ACL
B.Client
C.Virtual server
D.Back-end server
Answer:A
Citrix최신덤프 1Y0-A11자료 1Y0-A11 1Y0-A11덤프
NO.4 An administrator has just enabled caching and wants to make sure that this will positively impact server
performance. Which information can the administrator get from the Dashboard to determine whether
server performance was positively affected by enabling caching?
A.Client connection count increases
B.Server side request rate increases
C.Client connection count decreases
D.Server side request rate decreases
Answer:D
Citrix 1Y0-A11 1Y0-A11
NO.5 A company is planning on implementing NetScaler systems in high availability pairs. Which entry in the
NS.CONF file of the secondary system needs to be unique from those of the primary system?
A.VMAC
B.VIP address
C.MIP address
D.NSIP address
Answer:D
Citrix 1Y0-A11자격증 1Y0-A11 1Y0-A11 1Y0-A11 dump
NO.6 Scenario: An administrator is planning on configuring health checks for services bound to web servers 1
and 2 which are listening on TCP port 80 for HTTP and TCP port 443 for HTTPS. Service1 receives the
encrypted traffic and Service 2 receives the clear text traffic. How should the administrator create the
monitor for Service1 using the command line interface?
A.set mon monitor-SVC1-Mon TCP -secure YES
B.add lb mon monitor-SVC1-Mon HTTP -secure YES
C.set mon monitor-SVC1-Mon HTTP -transparent NO
D.add lb mon monitor-SVC1-Mon TCP -transparent NO
Answer:B
Citrix 1Y0-A11시험문제 1Y0-A11 1Y0-A11 1Y0-A11
NO.7 Scenario: A network administrator is deploying a NetScaler system in an environment with a single
subnet using this IP information: subnet: 192.168.10.32 netmask: 255.255.255.224 default gateway:
192.168.10.40 The administrator already set up the NSIP and MIP addresses using the command line
interface. Which command could the administrator use to complete this set up successfully?
A.add route 0.0.0.0 0.0.0.0 192.168.10.32
B.add route 0.0.0.0 0.0.0.0 192.168.10.40
C.add route 0.0.0.0 0.0.0.0 192.168.10.62
D.add route 192.168.10.0 255.255.255.224 192.168.10.32
E.add route 192.168.10.0 255.255.255.224 192.168.10.62
Answer:B
Citrix자격증 1Y0-A11 1Y0-A11자격증 1Y0-A11
NO.8 The primary node of a NetScaler high availability (HA) pair failed over immediately at start up during
the initial testing of the system. Which configuration step can the administrator take to prevent this from
happening again?
A.Disable monitoring on all connected interfaces
B.Enable node monitoring on all primary node interfaces
C.Run the "force HA sync" command from the primary node
D.Execute the "disable interface" command for all unused interfaces
Answer:D
Citrix 1Y0-A11최신덤프 1Y0-A11
NO.9 How can an administrator configure a health check for a server receiving HTTP traffic so that it monitors
the responses of the server to actual client requests as opposed to probes whenever possible?
A.Use the default TCP monitor
B.Configure an HTTP-ECV monitor
C.Configure an HTTP-Inline monitor
D.Use the TCP monitor with the transparent parameter selected
E.Configure an HTTP monitor with the transparent parameter selected
Answer:C
Citrix 1Y0-A11 1Y0-A11
NO.10 Which event would trigger a failover in a high availability pair?
A.The primary appliance reboots.
B.A forced synchronization event fails.
C.A monitored interface fails on the secondary node.
D.The default gateway does not return a heartbeat packet from the primary node.
Answer:A
Citrix덤프 1Y0-A11 dump 1Y0-A11 dump
NO.11 An administrator notices that the CPU usage on a NetScaler system spikes for aproximately one
minute every two days. Which step can the administrator take to find out what is causing the spike?
A.View the syslog
B.Run events on newnslog
C.View the Dashboard statistics
D.Run the stat ns node command
Answer:B
Citrix덤프 1Y0-A11자료 1Y0-A11기출문제 1Y0-A11덤프
NO.12 Where in the configuration utility can an administrator configure a NetScaler high availability pair to
ensure that specific interfaces are NOT monitored?
A.The root of the System node
B.The root of the Network node
C.The interface sub node in the System node
D.The interface sub node in the Network node
Answer:D
Citrix최신덤프 1Y0-A11 dumps 1Y0-A11
NO.13 Scenario: An administrator needs to create a health check that will mark an HTTP service down if the
bound monitor probe fails. The administrator wants to create a monitor and configure the health check so
that a trap is sent if the monitor probe reply exceeds 20 milliseconds. How can the administrator create
the monitor for this health check using the command line interface?
A.set mon monitor-HTTP-1 HTTP -interval 20 milli
B.add lb mon monitor-HTTP-1 HTTP -interval 20 milli
C.set mon monitor-HTTP-1 HTTP -resptimeout 20 milli
D.add lb mon monitor-HTTP-1 HTTP -resptimeout 20 milli
Answer:D
Citrix기출문제 1Y0-A11덤프 1Y0-A11 pdf 1Y0-A11 1Y0-A11
NO.14 Which SNMP trap must an administrator configure to be informed when the response time for a monitor
probe that had exceeded the set threshold returns to normal?
A.entityup
B.entitydown
C.monRespTimeoutAboveThresh
D.monRespTimeoutBelowThresh
Answer:D
Citrix자격증 1Y0-A11 1Y0-A11
NO.15 An administrator configured cache redirection and needs to provide a report of how that feature is
functioning in the network environment. What can the administrator use to see a graphical representation
of the statistics for the vserver performing the cache redirection?
A.The monitor view for the service bound to the correct vserver
B.The chart option in the Dashboard once the correct vserver is selected
C.The chart option in the Dashboard for the service bound to the correct vserver
D.The request and response rates option in the Dashboard once te correct vserver is selected
Answer:B
Citrix자료 1Y0-A11 1Y0-A11인증 1Y0-A11 1Y0-A11
NO.16 Scenario: An administrator installed a NetScaler system and configured the NSIP and MIP for the
system. The NetScaler system will be used primarily for load balancing in this environment. Which
additional step must the administrator take to ensure that the NetScaler system can perform the
necessary server load balancing in this environment?
A.Disable USIP mode on both nodes
B.Use the MIP as the NSIP for a high availability environment
C.Create VIPs for the front-end connections to the back-end servers
D.Enable USNIP mode for the front-end connections to the back-end servers
Answer:C
Citrix덤프 1Y0-A11자격증 1Y0-A11최신덤프 1Y0-A11 1Y0-A11 1Y0-A11 dumps
NO.17 Scenario: An administrator is planning the necessary configurations on a NetScaler system for an
environment that requires the NetScaler system to advertise virtual IP addresses, directly connected
routes and static routes on the upstream routers. What must the administrator ensure is configured on the
NetScaler system for this environment?
A.Static Routes
B.Link Load Balancing
C.Route Health Injection
D.Front-end Health Check
Answer:C
Citrix 1Y0-A11 dumps 1Y0-A11
NO.18 Scenario: A multinational company operates in areas where there is significant threat of natural
disaster. The administrator decides to create redundancy in their network because of a continuous power
outage threat at the South America site. The company also has two sites in North America, one near New
York and the other near the San Andreas fault line, a site of frequent earthquakes and tremors. The
company also has a site in Tokyo, Japan, which experiences several natural disaster threats. The
company plans to use a NetScaler system for load balancing and to prevent interruption of network
services because of a local natural or human disaster. Would a high availability (HA) deployment resolve
the issue described in the scenario, and if so, how should the HA nodes be paired? Click the Task button
to answer. Click the Exhibit button for instructions on how to complete a Drag and Drop item. Answer &
Explanation Correct Answer Explanations No more information available
Answer:
NO.19 An administrator should configure Link Aggregation on a 7000 NetScaler system when __________.
(Choose the correct option to complete the sentence.)
A.redundancy on a half duplex operation is required
B.redundancy on an operation across multiple data rates is required
C.the bandwidth requirements inbound to or outbound from the Netscaler are greater than 1 Gb/sec
D.the bandwidth requirements inbound to or outbound from the Netscaler are greater than 8 Gb/sec
Answer:C
Citrix 1Y0-A11 1Y0-A11최신덤프 1Y0-A11
NO.20 An SNMP manager attempted to poll for an OID but received the error message: "response timeout."
Which option could the administrator have misconfigured for SNMPv2 to cause this error message?
A.SNMP trap
B.SNMP user
C.SNMP group
D.SNMP community
Answer:D
Citrix 1Y0-A11 1Y0-A11 1Y0-A11시험문제 1Y0-A11
ITexamdump의 VCPC510덤프의 VCE테스트프로그램과 C4040-122덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-400시험에 대비한 고품질 덤프와 MB2-701시험 최신버전덤프를 제공해드립니다. 최고품질 C_TPLM30_65시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기