우리ITExamDump 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 시험대비 자료들과HP HP0-M18인증시험의 완벽한 문제와 답들입니다. 그리고 우리ITExamDump에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 우리에 믿음을 드리기 위하여HP HP0-M18관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼수 있게 제공합니다.
IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다. HP인증 HP0-M18시험이 아무리 어려워도ITExamDump의HP인증 HP0-M18덤프가 동반해주면 시험이 쉬워지는 법은 많이 알려져 있습니다. ITExamDump의HP인증 HP0-M18덤프는 100% 패스보장 가능한 덤프자료입니다.한번만 믿어주시고ITExamDump제품으로 가면 시험패스는 식은 죽 먹기처럼 간단합니다.
만약 아직도HP HP0-M18인증시험 위하여 많은 시간과 정력을 소모하며 열심히 공부하고 있습니까? 아직도 어덯게하면HP HP0-M18인증시험을 빠르게 취득할 수 있는 방법을 못찿고 계십니까? 지금ITExamDump에서HP HP0-M18인증시험을 안전하게 넘을 수 있도록 대책을 내드리겠습니다. 아주 신기한 효과가 있을 것입니다.
많은 사이트에서 HP인증 HP0-M18시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의HP인증 HP0-M18덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
ITExamDump전문가들은HP HP0-M18인증시험만을 위한 특별학습가이드를 만들었습니다.HP HP0-M18인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게HP HP0-M18인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다
시험 번호/코드: HP0-M18
시험 이름: HP (HP LoadRunner Software)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-11-18
HP0-M18 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-M18.html
NO.1 Which Analysis graph details the delay for the complete path between the source and destination
machines?
A. MS IIS
B. Windows Resource
C. Network Delay Time
D. Time to First Buffer Breakdown
Answer: C
HP pdf HP0-M18 dump HP0-M18
NO.2 Which option in the Analysis tool allows you to see the results of two graphs from the same load test
scenario in a single graph?
A. Drill Down
B. Apply Filter
C. Merge Graphs
D. Auto Correlate
Answer: C
HP HP0-M18 HP0-M18덤프
NO.3 Click the Exhibit button.
What does the image shown in the exhibit represent?
A. Thumbnail
B. Extended Log
C. Content Check
D. Snapshot on Error
Answer: D
HP dump HP0-M18 dump HP0-M18최신덤프
NO.4 Click the Exhibit button.
Which type of graph does the image in the exhibit represent?
A. Merged graph
B. Drill Down graph
C. Cross Scenario graph
D. Auto Correlated graph
Answer: C
HP HP0-M18 HP0-M18
NO.5 When you specify to iterate a script 10 times, which sections of the script are iterated?
A. group
B. action
C. vuser_init
D. vuser_end
Answer: B
HP HP0-M18덤프 HP0-M18 HP0-M18 HP0-M18최신덤프
NO.6 Where are the results stored during the run of a scenario?
A. Analysis
B. Controller
C. utility server
D. load generator
Answer: D
HP HP0-M18 HP0-M18자격증
NO.7 After the scenario execution, which LoadRunner component is responsible for collecting and
organizing the performance data?
A. VuGen
B. Analysis
C. Controller
D. load generator
Answer: C
HP기출문제 HP0-M18 HP0-M18자격증 HP0-M18 HP0-M18
NO.8 While analyzing the Vuser log files from a scenario run, you see the following log file from one of the
Vusers.
Start auto log message stack - Iteration 1.
Starting action BookFlight.
BookFlight.c(5): Notify: Transaction WT_00_Home_Page started.
BookFlight.c(7): Error -27796: Failed to connect to server 27.0.0.1:1080 [10061]
End auto log message stack.
What was the Run-time setting, Logging option set to?
A. Standard Logging
B. Extended Logging
C. Always send a message
D. Send a message only when an error occurs
Answer: D
HP덤프 HP0-M18 HP0-M18 HP0-M18
NO.9 During analysis of a scenario, you realize that the throughput becomes flat as Vusers continue to
increase. What is the likely cause?
A. a bandwidth problem
B. a database server problem
C. a web server connection problem
D. an application server connection problem
Answer:A
HP HP0-M18 HP0-M18 pdf HP0-M18 HP0-M18
NO.10 Which option in the Analysis tool allows you to compare a measurement in a graph with other
measurements during a specific time range of a scenario and view similar trends?
A. Drill Down
B. Apply Filter
C. Merge Graphs
D. Auto Correlate
Answer: D
HP HP0-M18자격증 HP0-M18 dumps HP0-M18인증 HP0-M18자료
NO.11 What does the elapsed time in the Scenario Status window refer to?
A. the time that has elapsed from when all Vusers have finished Initializing
B. the time that has elapsed from when all Vusers were in the running state
C. the time that has elapsed from when you press the start Scenario button
D. the time that has elapsed from when the first Vusers entered the running state
Answer: C
HP dumps HP0-M18 HP0-M18자격증
NO.12 When scheduling by scenario, to which group(s) does the defined schedule apply?
A. all groups in the scenario
B. only the first group in the scenario
C. only the selected group in the scenario
D. only the selected group in the scenario scheduler
Answer:A
HP HP0-M18 dump HP0-M18최신덤프 HP0-M18
NO.13 In the Analysis tool, what allows you to modify the scale of the x-axis?
A. think time
B. granularity
C. event type
D. transaction hierarchical path
Answer: B
HP dumps HP0-M18자료 HP0-M18 dumps
NO.14 Where in the Run-time settings can you define to only send messages when an error occurs?
A. General: Log
B. General: Run Logic
C. General: Miscellaneous
D. General: Additional Attributes
Answer:A
HP최신덤프 HP0-M18 pdf HP0-M18 HP0-M18자료
NO.15 Which scenario execution run allows you to verify the system performs as expected under load?
A. Debug
B. Full Load
C. Top Time
D. Scalability
Answer: B
HP HP0-M18최신덤프 HP0-M18
NO.16 When you define a rendezvous point in a scenario, where should the lr_start_transaction function be
placed?
A. at the end of the action section
B. at the beginning of the action section
C. immediately after the rendezvous function
D. immediately before the rendezvous function
Answer: C
HP HP0-M18 HP0-M18
NO.17 Which Analysis graph details transaction response times as a function of load?
A. Transactions per Second
B. Average Transaction Response Time
C. Transaction Response Time Under Load
D. Transaction Response Time (distribution)
Answer: C
HP HP0-M18 pdf HP0-M18자격증 HP0-M18 HP0-M18 pdf
NO.18 Which Analysis graph shows the number of transactions against transaction response times?
A. Transactions per Second
B. Average Transaction Response Time
C. Transaction Response Time Under Load
D. Transaction Response Time (distribution)
Answer: D
HP기출문제 HP0-M18시험문제 HP0-M18덤프 HP0-M18자료
NO.19 You configure a scenario to start with a delay of <05:00:00> (HH:MM:SS) just before leaving from
work. You return the next morning to find that the scenario did not run. Why would this happen?
A. You failed to save the scenario.
B. You failed to save the schedule.
C. You failed to connect to the load generators.
D. You failed to press the START SCENARIO button.
Answer: D
HP HP0-M18 HP0-M18 HP0-M18 HP0-M18
NO.20 You are running a test and notice that during the ramp up, the response times are beginning to
drastically increase. How can you instruct LoadRunner to stop ramping up Vusers and hold the current
number?
A. press the STOP button on the Controller's main window
B. press the PAUSE button on the Interactive Schedule graph
C. select the option to wait for the current iteration to end before stopping
D. select the Vusers in the Ready state from the Vusers window and click the STOP button
Answer: B
HP dumps HP0-M18 dump HP0-M18기출문제 HP0-M18 HP0-M18시험문제
ITexamdump의 CUR-009덤프의 VCE테스트프로그램과 1Z0-478덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-417시험에 대비한 고품질 덤프와 700-410시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-K36시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기