Novell 50-710 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Novell 50-710시험대비 덤프는Novell 50-710시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.
Novell인증 50-710시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. Novell인증 50-710시험을 패스하려면 ITExamDump의Novell인증 50-710덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. Novell인증 50-710덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.
우선 우리ITExamDump 사이트에서Novell 50-710관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Novell 50-710덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.
Novell인증사에서 주췌하는 50-710시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. ITExamDump에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. ITExamDump덤프로 자격증취득의 꿈을 이루세요.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Novell인증 50-710시험은 무조건 패스해야 합니다. 하지만Novell인증 50-710시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Novell인증 50-710시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Novell인증 50-710덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Novell인증 50-710영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
시험 번호/코드: 50-710
시험 이름: Novell (Novell Certified Linux Administrator)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 134 문항
업데이트: 2013-11-26
한번에Novell인증50-710시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.
50-710 덤프무료샘플다운로드하기: http://www.itexamdump.com/50-710.html
NO.1 Which command can you use to create a Reiser file system on the sda6 partition? (Choose 2.)
A. mkreiserfs /dev/sda6
B. fdisk.reiserfs /dev/sda6
C. makE. reiserfs /dev/sda6
D. fdisk -t reiserfs /dev/sda6
E. mkfs -t reiserfs /dev/sda6
Answer: AE
Novell덤프 50-710 50-710덤프 50-710 50-710자격증
NO.2 What information do you need to set up an LDAP client? (Choose 4.)
A. LDAP version
B. LDAP base DN
C. Kind of encryption
D. Synchronization frequency
E. Address of the LDAP server
F. File name of the LDAP database
Answer: ABCE
Novell 50-710인증 50-710 50-710기출문제
NO.3 Which statements about partitions are correct? (Choose 3.)
A. Extended partitions can be subdivided into logical partitions.
B. A primary partition consists of a continuous range of cylinders.
C. Logical partitions do not require entries in the main partition tablE.
D. If you use only primary partitions, you are limited to eight partitions per disk.
E. SUSE Linux Enterprise Server 10 can only be installed on a primary partition.
F. To install more than one operating system on a partition, the partition has to include the entire cylinder
rangE.
Answer: ABC
Novell 50-710기출문제 50-710 50-710 dumps
NO.4 Which are journaling file systems? (Choose 3.)
A. XFS
B. ext2
C. ext3
D. VFAT
E. minix
F. VFAT32
G. ReiserFS
Answer: ACG
Novell인증 50-710인증 50-710 50-710덤프 50-710덤프
NO.5 Which statements about the LVM components are correct? (Choose 2.)
A. A volume group is part of a logical volumE.
B. Logical volumes are grouped in a master group.
C. A volume group always consists of one physical volumE.
D. A physical volume can be a partition or an entire hard disk.
E. A volume group can be reduced in size by removing physical volumes.
F. The operating system accesses the volume groups like conventional physical partitions.
Answer: DE
Novell 50-710 50-710최신덤프
NO.6 Waht is the correct syntax for mounting the second partition of the first SCSI hard disk?
A. mount /mnt /dev/hda2
B. mount /dev/hda2 /mnt
C. mount /dev/sdb1 /mnt
D. mount /mnt /dev/sdb1
E. mount /dev/sda2 /mnt
F. mount /mnt /dev/sda2
Answer: E
Novell 50-710 50-710 pdf
NO.7 How large is an inode?
A. 256 bits
B. 64 Kbytes
C. 128 bytes
D. 1 Mbyte
Answer: C
Novell 50-710 50-710덤프 50-710 dump
NO.8 Why are the noauto and users options used with /etc/fstab?
A. A normal user is not allowed to access this partition.
B. They allow any user to mount and unmount a partition.
C. They specify the partitions that are bootable by a user.
D. They specify the partitions that are not bootable by a user.
Answer: B
Novell 50-710 pdf 50-710기출문제 50-710 pdf 50-710자격증
NO.9 As system administrator root, you use the lpoptions command to change printer options, such as the
page sizE. To which file are these options saved?
A. ~/.bashrc
B. ~/.lpoptions
C. /etc/cups/lpoptions
D. /etc/sysconfig/cups
Answer: C
Novell자격증 50-710 50-710 dump 50-710 dumps
NO.10 Which command is used to enter or change the quota for user tux?
A. quotacheck
B. repquota tux
C. edquota -u tux
D. edquota -g tux
E. /sbin/quotaon tux
Answer: C
Novell자격증 50-710인증 50-710자격증 50-710시험문제 50-710
NO.11 Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cachE.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C
Novell기출문제 50-710 50-710덤프 50-710 50-710
NO.12 Which command can be used to view the inode assigned to a filename?
A. ls -i
B. fsck -h -i
C. inode --list
D. cat /proc/inodes
Answer: A
Novell자격증 50-710 dumps 50-710덤프 50-710 pdf 50-710인증
NO.13 In which file is the host name of a Linux computer configured? (Hint: You do not need to include the
entire patH. )
Answer:______
Answer:
NO.14 Which is the main configuration file for logrotate?
A. /etc/logrotate
B. /etc/logr.conf
C. /etc/cron/logrotate
D. /etc/logrotatE. conf
Answer: D
Novell최신덤프 50-710자격증 50-710 dump 50-710 50-710덤프 50-710
NO.15 You would like to run command1 and then command2, whether or not command1 completed
successfully. Which command accomplishes this task?
A. command1 | command2
B. command1 ; command2
C. command1 > command2
D. command1 & command2
Answer: B
Novell dump 50-710 50-710기출문제 50-710인증
NO.16 Which user authentication methods can be used with SLES 10? (Choose 4.)
A. NIS
B. WEP
C. SSH
D. PAM
E. LDAP
F. Handshake
G. Windows Domain
H. Local (/etc/passwd)
Answer: AEGH
Novell자료 50-710 50-710최신덤프 50-710최신덤프 50-710 50-710
NO.17 What is the correct order of steps to change the partition table using fdisk?
A. You can't use fdisk to change a partition tablE.
B. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Reboot.
C. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Load the
partition table from the boot prompt.
D. Start fdisk > Change the partition table > Write the partition table to floppy disk or USB stick > Exit
fdisk > Boot from floppy disk or USB stick.
Answer: B
Novell인증 50-710 50-710
NO.18 Which command can you use to check an ext2/ext3 file system for a correct superblock, faulty data
blocks, or faulty allocation of data blocks?
A. df
B. du
C. fdisk
D. e2fsck
E. reiserfsck
Answer: D
Novell 50-710 50-710 50-710시험문제
NO.19 You want to view the last 20 lines of the /var/log/messages file and any new lines that are subsequently
added by syslog to this filE. Which command would you use?
A. tail -20f /var/log/messages
B. end -20f /var/log/messages
C. less -20f /var/log/messages
D. follow -20 /var/log/messages
Answer: A
Novell 50-710 50-710
NO.20 What is the minimum number of partitions required by a SLES 10 system?
A. None
B. 1
C. 2
D. 4
Answer: C
Novell최신덤프 50-710 50-710 dump 50-710자격증
ITexamdump의 HP0-J62덤프의 VCE테스트프로그램과 642-384덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-465시험에 대비한 고품질 덤프와 HP3-C29시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-958시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기