도비 Microsoft 70-545-Csharp 시험

ITExamDump에서 출시한 Microsoft인증 70-545-Csharp덤프는Microsoft인증 70-545-Csharp시험에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.ITExamDump는 고품질 Microsoft인증 70-545-Csharp덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. ITExamDump의 소원대로 멋진 IT전문가도 거듭나세요.

한번에Microsoft인증70-545-Csharp시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.

ITExamDump의 Microsoft 70-545-Csharp덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 Microsoft 70-545-Csharp덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.

근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. Microsoft인증 70-545-Csharp시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이Microsoft인증 70-545-Csharp시험을 한방에 패스하도록 실제시험문제에 대비한Microsoft인증 70-545-Csharp덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.

ITExamDump는 IT인증시험 자격증 공부자료를 제공해드리는 전문적인 사이트입니다. ITExamDump제품은 100%통과율을 자랑하고 있습니다. Microsoft인증 70-545-Csharp시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. ITExamDump가 있으면 이런 걱정은 하지 않으셔도 됩니다. ITExamDump의Microsoft인증 70-545-Csharp덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다.

시험 번호/코드: 70-545-Csharp

시험 이름: Microsoft (TS:Microsoft Visio 2007, Application Development)

Microsoft 70-545-Csharp인증시험은 전업적지식이 강한 인증입니다. IT업계에서 일자리를 찾고 계시다면 많은 회사에서는Microsoft 70-545-Csharp있는지 없는지에 알고 싶어합니다. 만약Microsoft 70-545-Csharp자격증이 있으시다면 여러분은 당연히 경쟁력향상입니다.

70-545-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-545-Csharp.html

NO.1 You need to create two PivotDiagrams in Office Visio 2007 by using the minimum number of Visio
documents and pages. What should you do?
A. Create two new Visio documents by using the PivotDiagram template.
B. Create a new Visio document by using the PivotDiagram template. Insert a PivotDiagram into the
existing page.
C. Create a new Visio document by using the PivotDiagram template. Insert a new page, and then insert
the PivotDiagram into the new page.
D. Create two new Visio documents by using the PivotDiagram template. Copy the PivotDiagram from
one document to a blank page in the other document.
Answer: B

Microsoft기출문제   70-545-Csharp덤프   70-545-Csharp   70-545-Csharp인증   70-545-Csharp pdf

NO.2 You need to create an organization chart of employees by using a comma-separated values (CSV) file
and the Organization Chart Wizard. Which two columns must the CSV file contain? (Each correct
answer presents part of the solution. Choose two.)
A. A column that uniquely identifies each employee
B. A column that identifies each employees job title
C. A column that contains each employees department
D. A column that identifies who each employee reports to
Answer: AD

Microsoft자료   70-545-Csharp   70-545-Csharp   70-545-Csharp자격증   70-545-Csharp인증

NO.3 You have an ODBC database that contains information that you want to display in Office Visio 2007.
You need to update the database records by modifying shape data from Visio 2007. What are three
possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. In Visio, use the Link Data to Shapes command from the Data menu.
B. In Visio, point to Visio Extras, start the Database Wizard, and then click Link shapes to database
records.
C. In Visio, click Import Data on the Plan menu.
D. In Visio, point to Visio Extras and click Link to ODBC Database.
E. Create custom code functions to read data from the data source, update the Shape Data rows, and
then write the data to the data source.
Answer: BDE

Microsoft   70-545-Csharp시험문제   70-545-Csharp인증

NO.4 You have a shape that contains a Shape Data row named Grade, where Type=0. You need to modify
the Grade row so that it is visible and read-only within the Shape Data window and the Shape Data dialog
box. What should you do?
A. In the Prop.Grade row, change the value of the Type cell to 9.
B. In the Prop.Grade row, change the value of the Type cell to 1, and the formula in the Format cell to
=Prop.Grade.
C. In the Prop.Grade row, change the formula in the Format cell to =LOCK.
D. Insert a new user-defined cell with the formula =
DEPENDSON(Prop.Grade)+SETF(GetRef(Prop.Grade),Prop.Grade).
Answer: B

Microsoft자료   70-545-Csharp   70-545-Csharp

NO.5 You create a shape that has two Shape Data rows named Department and CostCode. Both the
Department and the CostCode rows have the Type =1.
The Department row Format cell has the formula =A;B.
You need to modify the ShapeSheet to meet the following requirements:
When a user selects Department A, only CostCodes A1 and A2 are visible.
When a user selects Department B, only CostCodes B1 and B2 are visible.
What should you do?
A. Insert a new user-defined cell and enter the formula =SETF(GetRef(Prop.CostCode.Format), =
INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|"))
B. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2")
C. Enter the following formula in the Format cell of the CostCode Shape Data row.
=""""&INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")&""""
D. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")
Answer: D

Microsoft기출문제   70-545-Csharp   70-545-Csharp자격증   70-545-Csharp인증   70-545-Csharp dumps

NO.6 You have a drawing that contains custom shape data. You need to export the shape data to a new
Microsoft Office Excel 2007 workbook. What should you do?
A. Use the Database Wizard.
B. Use the Reports command.
C. Use the Export to Database command.
D. Save the file as an XML drawing.
Answer: B

Microsoft자료   70-545-Csharp   70-545-Csharp자료

NO.7 You need to link a master shape to an ODBC database. The master shape must display the Update
Database Record command when you right-click the shape. What should you do?
A. In Office Visio 2007, run the Database Wizard.
B. From Control Panel, add a new ODBC data source.
C. In Office Visio 2007, run the Database Export Wizard.
D. In Office Visio 2007, run the Export to Database command.
Answer: A

Microsoft   70-545-Csharp시험문제   70-545-Csharp dumps

NO.8 You plan to create a timeline diagram by using Microsoft Office Project 2007. You need to ensure
that the Project data can be imported into Office Visio 2007 by using the Import Timeline Wizard. What
should you do?
A. In Project, save the data as a Microsoft Project File (*.mpp).
B. In Project, save the data as a Microsoft Project Database (*.mpd).
C. In Project, save the data as a Microsoft Project Workspace (*.mpw).
D. In Project, save the data as a Microsoft Project Exchange (*.mpx).
Answer: A

Microsoft   70-545-Csharp   70-545-Csharp   70-545-Csharp최신덤프   70-545-Csharp최신덤프

NO.9 You receive an XML data file and a separate XML schema file. The XML schema file describes the XML
data. You need to load the XML data file into the External Data window. Which two actions should
you perform? (Each correct answer presents part of the solution. Choose two.)
A. Transform the XML data file into the classic ActiveX Data Objects (ADO) RowsetSchema format.
B. Verify that the XML data file is well-formed and uses the namespace
http://schemas.microsoft.com/visio/2006/extension.
C. In a code module, use the DataRecordsets object Add method in the Office Visio 2007 document.
D. In a code module, use the DataRecordsets object AddFromXML method in the Office Visio 2007
document.
Answer: AD

Microsoft인증   70-545-Csharp   70-545-Csharp pdf   70-545-Csharp자격증   70-545-Csharp dump   70-545-Csharp

NO.10 An External Data recordset named Computer Inventory contains a column named MachineSN. You
create a new Office Visio 2007 diagram and load the Computers and Monitors stencil. A shape named PC
Master from the Computers and Monitors stencil has a Shape Data row labeled Serial Number. To add
a shape to the Visio 2007 diagram, you select the PC Master shape, and then drag and drop a row from
the External Data window to the Visio 2007 page. You notice that the new shapes Serial Number row is
empty. You need the values from the MachineSN column to be entered automatically into the row
labeled Serial Number when you add the shape. What should you do?
A. Change the name of the External Data recordsets column from MachineSN to Serial Number.
B. Change the name of the External Data recordset from Computer Inventory to Serial Number.
C. Modify the PC Master shape on the document stencil. Change the row name of the shape data row
from Serial Number to MachineSN.
D. Copy the PC Master shape to the document stencil. Change the label of the shape data row from
Serial Number to _visDM_MachineSN.
Answer: A

Microsoft   70-545-Csharp dump   70-545-Csharp   70-545-Csharp   70-545-Csharp자격증

Microsoft인증70-545-Csharp시험을 위하여 최고의 선택이 필요합니다. ITExamDump 선택으로 좋은 성적도 얻고 하면서 저희 선택을 후회하지 않을것니다.돈은 적게 들고 효과는 아주 좋습니다.우리ITExamDump여러분의 응시분비에 많은 도움이 될뿐만아니라Microsoft인증70-545-Csharp시험은 또 일년무료 업데이트서비스를 제공합니다.작은 돈을 투자하고 이렇게 좋은 성과는 아주 바람직하다고 봅니다.