ITExamDump에서 출시한 SASInstitute 인증 A00-212시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.
ITExamDump의 SASInstitute인증 A00-212덤프를 선택하여SASInstitute인증 A00-212시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고SASInstitute인증 A00-212시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. SASInstitute인증 A00-212덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.
IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 SASInstitute인증 A00-212시험에 도전하는 분이 많은데 ITExamDump에서 SASInstitute인증 A00-212시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.
시험 번호/코드: A00-212
시험 이름: SASInstitute (SAS Advanced Programming Exam for SAS 9)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 132 문항
업데이트: 2014-03-16
많은 사이트에서도 무료SASInstitute A00-212덤프데모를 제공합니다. 우리도 마찬가지입니다. 여러분은 그러한SASInstitute A00-212데모들을 보시고 다시 우리의 덤프와 비교하시면, 우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아사될 것 입니다. 우리 ITExamDump사이트에서 제공되는SASInstitute인증A00-212시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 왜냐면 우리 ITExamDump에는 베터랑의 전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이SASInstitute인증A00-212시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이SASInstitute인증A00-212시험에 많은 도움이SASInstitute A00-212될 것입니다. ITExamDump 가 제공하는A00-212테스트버전과 문제집은 모두SASInstitute A00-212인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에SASInstitute A00-212시험을 패스하실 수 있습니다. 때문에SASInstitute A00-212덤프의 인기는 당연히 짱 입니다.
A00-212 덤프무료샘플다운로드하기: http://www.itexamdump.com/A00-212.html
NO.1 The following SAS program is submitted:
date view=sauser.ranch;
describe;
run;
What is the result?
A. The program creates a DATA step view called SASUSER.RANCH and places the
program cod in the current editor window
B. The program retrieves the SAS source code that creates the view and places it in the
output window
C. The program creates a DATA step view called SASUSER.RANCH and places it in the
SAS log
D. the program retrieves the SAS source code that creates the view and places it in the
SAS log
Answer: D
SASInstitute pdf A00-212기출문제 A00-212 dumps A00-212 A00-212자격증
NO.2 The following SAS program is submitted:
Data sasuser.history;
Set sasuser.history(keep=state x y
Rename = (state=ST));
Total=sum(x,y);
Run;
The SAS data set SASUSER.HISTORY has an index on the variable STATE.
Which describes the result of submitting the SAS program?
A. The index on STATE is deleted and an index on ST is created
B. The index on STATE is recreated as an index on ST
C. The index on STATE is deleted
D. The index on STATE is updated as an index on ST
Answer: C
SASInstitute덤프 A00-212 A00-212 A00-212 dump
NO.3 Which SET statements option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. OBS=pointobs
B. POINT=pointobs
C. KEY=pointobs
D. NOBS=pointobs
Answer: B
SASInstitute pdf A00-212기출문제 A00-212인증
NO.4 Given the SAS data set SAUSER.HIGWAY:
SASUSER.HIGHWAY
The following SAS program is submitted:
%macro highway;
proc sql nonprint;
%let numgrp=6;
select distinct status into:group1-:group&numgrp from sasuser.highway;
quit;
%do i=1 %to &numgrp;
proc print data =sasuser.highway;
where status ="&&group&I";
run;
%end;
%mend;
%highway
How many reports are produced?
A. 2
B. 6
C. 0
D. 5
Answer: A
SASInstitute자격증 A00-212 dumps A00-212 A00-212자료
NO.5 Which SET statement option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. NOBS=pointobs
B. OBS=pointobs
C. KEY=pointobs
D. POINT=pointobs
Answer: D
SASInstitute A00-212 A00-212덤프 A00-212 dump A00-212
NO.6 When reading a SAS data file, what does the NOBS=option on the SET statement
represent?
A. A variable that represents the total number of observation in the output data set(s)
B. A variable that represents a flag indicating the end of the file
C. A variable that represents the total number of observations in the input data set(s)
D. A variable that represents the current observation number
Answer: C
SASInstitute덤프 A00-212기출문제 A00-212 A00-212
NO.7 CORRECT TEXT
The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
result is
result is 10
result is 10.5
result is 10+0.5
Answer: C
SASInstitute dump A00-212 pdf A00-212 A00-212 A00-212 A00-212 dumps
NO.8 Which SAS procedure changes the name of a permanent format for a variable stored in a SAS data
set?
A. DATASETS
B. MODIFY
C. FORMAT
D. REGISTRY
Answer: A
SASInstitute A00-212 dump A00-212 A00-212 dumps
NO.9 The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
A. result is
B. result is 10.5
C. result is 10+0.5
D. result is 10
Answer: B
SASInstitute A00-212 A00-212 A00-212 A00-212
NO.10 Given the SAS data set ONE:
ONE
DIVISION SALES
A 1234
A 3654
B 5678
The following SAS program is submitted:
Data_null_;
Set one;
By divition;
If first.division then
Do;
%let mfirst=sales;
end;
run;
What is the value of the macro variable MFRIST when the program finishes execution?
A. 1234
B. sales
C. 5678
D. null
Answer: B
SASInstitute최신덤프 A00-212최신덤프 A00-212 dump A00-212 A00-212 A00-212
NO.11 The following SAS program is submitted:
data temp;
length 1 b 3 x;
infile 'file reference';
input a b x;
run;
What is the result?
A. The data set TEMP is not created because variables A and B have invalid lengths
B. The data set TEMP is created, but variable X is not created
C. The data set TEMP is not created because variable A has an invalid length
D. The data set TEMP is created and variable X has a length of 8
Answer: C
SASInstitute기출문제 A00-212 A00-212 A00-212 A00-212인증 A00-212 pdf
NO.12 The following SAS program is submitted:
%let first=yourname;
%let last=first;
%put &&&last;
What is written to the SAS Log?
A. First
B. Yourname
C. &&First
D. &yourname
Answer: B
SASInstitute A00-212 A00-212 A00-212 A00-212기출문제
NO.13 The following SAS program is submitted:
%macro check(num=4);
%let result=%eval(&nm gt 5);
%put result is &result;
%mend;
%check (num=10)
What is written to the SAS log?
A. result is true
B. result is 10 gt 5
C. result is 1
D. result is 0
Answer: C
SASInstitute기출문제 A00-212인증 A00-212 A00-212 A00-212
NO.14 Given the SAS data sets ONE and TWO:
The following SAS program is submitted:
Proc sql;
Select two.*,budget from one <insert JOIN operator here> two on one.year=two.year,
Quit;
The following output is desired:
Which JOIN operator completes the program and generates the desired output? A. FULL JOIN
B. INNER JOIN
C. LEFT JOIN
D. RIGHT JOIN
Answer: A
SASInstitute A00-212자격증 A00-212 A00-212자격증 A00-212최신덤프
NO.15 The following SAS program is submitted:
%macro one(input);
%two;
%put the value is &date;
%mend;
%macro two;
data _null_;
call symput('date','12SEP2008');
run;
%mend;
%let date=31DEC2006;
%one(&date)
What is the result when the %PUT statement executes.?
A. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the ONE macro
B. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the TWO macro
C. A macro variable DATE with the value 12SEP2008 is retrieved from the global
symbol table
D. A macro variable DATE with the value 31DEC2006 is retrieved from the global
symbol table
Answer: C
SASInstitute A00-212 A00-212인증
NO.16 Which SQL procedure program deletes rows from the data set CLASS? A. proc sql;
Select * from class
Where age<(select stop_age from threshold);
Quit;
B. proc sql;
Modify table class
Delete where age<(select stop_age from threshold);
Quit
C. proc sql;
Delete from class
Where age<(select stop_age from threshold);
Quit;
D. proc sql;
Alter from class
Delete where age<(select stop_age from threshold);
Quit;
Answer: C
SASInstitute pdf A00-212 A00-212최신덤프 A00-212기출문제 A00-212덤프 A00-212
NO.17 The following SAS program is submitted:
%let a=cat;
%macro animal(a=frog);
%let a=bird;
%mend;
%animal(a=pig)
%put a is &a;
What is written to the SAS log?
A. a is pig
B. a set cat
C. a is frog
D. a is bird
Answer: B
SASInstitute A00-212 A00-212최신덤프 A00-212 dump A00-212기출문제 A00-212 dump
NO.18 The following SAS program is submitted:
%let dept=prod;
%let prod=merchandise;
The following message is written to the SAS log:
The value is "merchandise"
Which SAS System option writes this message to the SAS log? A. %put the value is "&&&dept";
B. %put the value is "&&&dept";
C. %put the value is "&&&dept";
D. %put the value is %quote(&&&dept);
Answer: A
SASInstitute dumps A00-212 dump A00-212 dump A00-212 dumps A00-212
NO.19 The SAS data set WORK.TEMPDATA contains the variables FMTNAME, START and
LABEL and it consists of 10 observations.
The following SAS program is submitted:
Proc format cntlin=wor.tempdata;
Run;
What is the result of submitting the FORMAT procedure step?
A. It uses the WORK.TEMPDATA SAS data set as input to create the format
B. All formats created will be stored in two WORK.TEMPDATA SAS data set
C. An ERROR message is written to the SAS log because the program is incomplete
D. NO formats are created in this step
Answer: A
SASInstitute시험문제 A00-212시험문제 A00-212인증 A00-212
NO.20 The following SAS program is submitted:
%micro test(var);
%let jobs=BLACKSMITH WORDSMITH SWORDSMITH;
%let type=%index(&jobs,&var);
%put type = &type;
%mend;
%test(SMITH)
What is the value of the macro variable TYPE when the %PUT statement executes?
A. 0
B. Null
C. 6
D. 3
Answer: C
SASInstitute A00-212 A00-212 pdf A00-212 A00-212 A00-212
ITexamdump의 C_TAW12_731덤프의 VCE테스트프로그램과 MB6-872덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 E20-554시험에 대비한 고품질 덤프와 JN0-696시험 최신버전덤프를 제공해드립니다. 최고품질 646-206시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기