ITExamDump IBM인증000-421시험덤프 구매전 구매사이트에서 무료샘플을 다운받아 PDF버전 덤프내용을 우선 체험해보실수 있습니다. 무료샘플을 보시면ITExamDump IBM인증000-421시험대비자료에 믿음이 갈것입니다.고객님의 이익을 보장해드리기 위하여ITExamDump는 시험불합격시 덤프비용전액환불을 무조건 약속합니다. ITExamDump의 도움으로 더욱 많은 분들이 멋진 IT전문가로 거듭나기를 바라는바입니다.
ITExamDump의 완벽한 IBM인증 000-421덤프는 고객님이IBM인증 000-421시험을 패스하는 지름길입니다. 시간과 돈을 적게 들이는 반면 효과는 십점만점에 십점입니다. ITExamDump의 IBM인증 000-421덤프를 선택하시면 고객님께서 원하시는 시험점수를 받아 자격증을 쉽게 취득할수 있습니다.
IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. IBM 인증 000-421시험은 아주 유용한 시험입니다. IBM 인증000-421시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는IBM 인증000-421시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는IBM 인증000-421시험덤프는 시장에서 판매하고 있는IBM 인증000-421덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.
ITExamDump의 IBM인증 000-421시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 IBM인증 000-421시험덤프로 어려운 IBM인증 000-421시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게IBM 000-421인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.
시험 번호/코드: 000-421
시험 이름: IBM (InfoSphere DataStage v8.5)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 194 문항
업데이트: 2013-10-16
IT인증자격증만 소지한다면 일상생활에서 많은 도움이 될것입니다. 하지만 문제는 어떻게 간단하게 시험을 패스할것인가 입니다. ITExamDump는 IT전문가들이 제공한 시험관련 최신 연구자료들을 제공해드립니다.ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다. ITExamDump의IBM 인증000-421시험대비 덤프로IBM 인증000-421시험을 패스하세요.
000-421 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-421.html
NO.1 Click on the Exhibit button.
A. 3 processes on 2 nodes
B. 3 processes on 3 nodes
C. 2 processes on 2 nodes
D. 2 processes on 3 nodes
Answer: A
IBM 000-421 dumps 000-421시험문제 000-421 000-421 dumps 000-421
NO.2 You would like to pass values into parameters that will be used in a variety of downstream activity
stages within a job sequence. What are three valid ways to do this? (Choose three.)
A. Use local parameters.
B. Use environment variables.
C. Place a parameter set stage on the job sequence.
D. Check the "Propagate Parameters" checkbox in the Sequence Job properties.
E. Use theUserVariablesActivity Stage to populate the local parameters from an outside source such as a
file.
Answer: A,B,E
IBM 000-421 000-421인증
NO.3 You are responsible for deploying objects into your customers production environment. To ensure the
stability of the production system the customer does not permit compilers on production machines. They
have also protected the project and only development machines have the required compiler. What two
options will allow jobs with a parallel transformer to execute in the customers production machines?
(Choose two.)
A. Add $APT_COMPILE_OPT=-portable
B. Set $APT_COPY_TRANSFORM_OPERATOR
C. Export the jobs with Information Server Manager with the executables.
D. Create a package with Information Server Manager and select the option to include executables.
Answer: C,D
IBM pdf 000-421 dumps 000-421
NO.4 You are working on a project that contains a large number of jobs contained in many folders. You would
like to review the jobs created by the former developer of the project. How can you find these jobs?
A. Filter jobs in Director Client's Repository window.
B. Sort the jobs by date in the Repository window.
C. Use the Advanced Find feature contained in the Designer interface.
D. While selecting the top folder in the project, choose Find Dependencies.
Answer: C
IBM 000-421기출문제 000-421 000-421 dumps
NO.5 You are about to begin major changes to jobs in a project. You want to conveniently identify job
changes on an ad hoc basis. What two tasks will allow you to identify changes to your jobs? (Choose
two.)
A. Import the original job from a .dsx export.
B. Select the job,then right click Compare within.
C. Select the job,then right click Cross Project Compare.
D. Before making a change to a job make a copy of the job in a different category folder.
Answer: B,D
IBM 000-421덤프 000-421 000-421시험문제 000-421 pdf 000-421
NO.6 Click the exhibit button.
You submit a job from DataStage Director and then log onto your DataStage Linux server to issue the
command "ps -ef | grep ds" and receive the following screen: Which process is a player?
A. 7117
B. 7215
C. 7216
D. 7217
Answer: D
IBM 000-421자격증 000-421 000-421 pdf
NO.7 You are responsible for the projects Source Code Repository. When a developer notifies you that
changes are ready to deploy you must first check them in. You will use the Information Server Source
Code integration features to check in the changed assets. How will you identify the DataStage assets the
developer modified in order to send them to the workspace?
A. From the Information Server Manager Select theproject then right-click on Synchronize with source
code control system.
B. Use Designer client Advanced Find, specify a modification date and the developer's username in the
Modified by fields.
C. From Information Server Manager use Search with advanced options, specify a date modified and the
developer's user name in the Modified by fields.
D. From the workspace perspective select the project Right-click then Refresh fromrepository,specify a
modification date and the developer's username in the Modified by fields.
Answer: C
IBM 000-421 000-421
NO.8 What would help debug the run-time environment?
A. $APT_VERBOSE
B. $OSH_PRINT_SCHEMAS
C. Check the message filters for the job.
D. View detailed runtime stats through Job monitor in Director Client.
Answer: B
IBM 000-421 000-421 dumps 000-421 000-421
NO.9 Where are project level message handlers defined?
A. DSENV
B. Director Client
C. Designer Client
D. Administrator Client
Answer: D
IBM 000-421 pdf 000-421최신덤프
NO.10 Which two property areas must be configured when using the ODBC connector stage as a target in
your job design? (Choose two.)
A. Define columns for the output link.
B. Specify the remote server property.
C. Specify properties for the input link.
D. Define the connection properties to an ODBC data source.
Answer: C,D
IBM 000-421 000-421 dump
NO.11 You have been asked to delete a shared container from the project by your customer. Before you do
this you want to make sure it will not impact other objects in the project. How will you ensure that deleting
the shared container will not cause a failure when jobs are recompiled?
A. Select the shared container, Right-click on the Where used command.
B. Select the shared container, Right-click on the Where used (deep) command.
C. Select the shared container, Right-click on the Dependencies (deep) command.
D. Advanced find, set Dependencies Of field equal to the container name, and Check the Option
toInclude nested results for Dependency searches.
Answer: B
IBM 000-421 000-421 000-421 000-421자료
NO.12 When you configure a domain for source code integration a source control workspace is created. What
are two reasons for the source control workspace? (Choose two.)
A. default directory foristool exports.
B. directory for deployment package files
C. local transfer area for assets being submitted to the source control system
D. provides a place to store the archive created by IS source code control integration
Answer: C,D
IBM 000-421 dump 000-421최신덤프
NO.13 Click on the Exhibit button.
Provided you have enough system resources, what is the maximum number of jobs that could be running
concurrently in this image?
A. 2
B. 3
C. 4
D. 5
Answer: B
IBM인증 000-421 000-421 000-421자격증 000-421시험문제
NO.14 hich three of the following options does the dsjob command have? (Choose three.)
A. Stopping a job
B. Setting an alias for a job
C. Specifying an appropriate log file
D. Listing projects, jobs, stages, links, and parameters
Answer: A,B,D
IBM인증 000-421 dumps 000-421 pdf
NO.15 You set environment variable $APT_ORACLE_LOAD_OPTIONS=PTIONS(DIRECT=TRUE,
PARALLEL=TRUE)?for loading index organized tables.You set environment variable
$APT_ORACLE_LOAD_OPTIONS=?PTIONS(DIRECT=TRUE, PARALLEL=TRUE)?for loading index
organized tables. Which statement is accurate regarding the resulting effect of this environment variable
setting?
A. Oracle load will fail when executed.
B. Oracle load will run in parallel and bypassDataStage Director.
C. The Oracle load will run in parallel using simple direct path mode.
D. The Oracle database stage will run in parallel using conventional path mode.
Answer: A
IBM 000-421 000-421
NO.16 Which two statements are accurate regarding usage of database stages? (Choose two.)
A. Plug-in stages match columns by name.
B. Native database stages match columns by name.
C. DataStage provides native Oracle database stages.
D. Database stages cannot create tables and must be done externally.
Answer: B,C
IBM dump 000-421 pdf 000-421시험문제 000-421자료 000-421
NO.17 To better understand the data flowing through a job, it is desirable to have structural information about
the datasets captured in the job log. Which environment variable can provide this information?
A. $OSH_STDOUT_MSG
B. $OSH_PRINT_SCHEMAS
C. $APT_PM_PLAYER_MEMORY
D. $APT_NO_PART_INSERTION
Answer: B
IBM 000-421자격증 000-421기출문제 000-421 dump
NO.18 In which two situations is it appropriate to use a Sparse Lookup? (Choose two.)
A. When accessing DB2 data using the DB2 API stage.
B. When the output of the Lookup stage needs to be hashed partitioned.
C. When reference data is significantly larger than the streaming data (100:1).
D. When invoking a stored procedure within a database per row in the streaming link.
Answer: C,D
IBM dump 000-421자격증 000-421자료
NO.19 DataStageoffers database connectivity through connectors, native parallel and plug-in stage types.
Which two statements are correct? (Choose two.)
A. ODBC API is a plug-in stage.
B. Next to the connector stage it is best to use the native parallel database stages.
C. The connector stage offers better functionality and performance and is the best to use.
D. For maximum parallel performance, scalability, and features it is best to use the native parallel
database stages.
Answer: B,C
IBM자격증 000-421기출문제 000-421기출문제 000-421
NO.20 You are experiencing performance issues for a given job. You are assigned the task of understanding
what is happening at run time for that job. What are the first two steps you should take to understand the
job performance issues? (Choose two.)
A. Review the objectives of the job.
B. Run job with $APT_TRACE_RUN set to true.
C. Run job with $APT_DUMP_SCORE set to true.
D. Replace Transformer stages with custom operators.
Answer: A,C
IBM 000-421 000-421덤프
ITexamdump의 BCP-340덤프의 VCE테스트프로그램과 LOT-440덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 100-500시험에 대비한 고품질 덤프와 VCPC510시험 최신버전덤프를 제공해드립니다. 최고품질 70-481시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기