ITExamDump의 Cisco인증 350-040시험덤프는 고객님의 IT자격증을 취득하는 꿈을 실현시켜 드리는 시험패스의 지름길입니다. Cisco인증 350-040덤프에는 실제시험문제의 거의 모든 문제를 적중하고 습니다. ITExamDump의 Cisco인증 350-040덤프가 있으면 시험패스가 한결 간편해집니다.
다른 방식으로 같은 목적을 이룰 수 있다는 점 아세요? 여러분께서는 어떤 방식, 어느 길을 선택하시겠습니까? 많은 분들은Cisco인증350-040시험패스로 자기 일에서 생활에서 한층 업그레이드 되기를 바랍니다. 하지만 모두 다 알고계시는그대로Cisco인증350-040시험은 간단하게 패스할 수 있는 시험이 아닙니다. 많은 분들이Cisco인증350-040시험을 위하여 많은 시간과 정신력을 투자하고 있습니다. 하지만 성공하는 분들은 적습니다.
ITExamDump 에서 제공해드리는 Cisco 350-040덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 Cisco 350-040 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히Cisco 350-040시험을 패스할 수 있도록 최선을 다하고 있습니다.
제일 빠른 시일내에 제일 간단한 방법으로Cisco인증 350-040시험을 패스하는 방법이 없냐구요? ITExamDump의Cisco인증 350-040덤프를 공부하시면 가능합니다. ITExamDump의Cisco인증 350-040덤프는 많은 분들이 검증한 가장 유력한Cisco인증 350-040시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.
IT업계에 종사하는 분들은 치열한 경쟁을 많이 느낄것입니다. 치열한 경쟁속에서 자신의 위치를 보장하는 길은 더 많이 배우고 더 많이 노력하는것 뿐입니다.국제적으로 인정받은 IT인증자격증을 취득하는것이 제일 중요한 부분이 아닌가 싶기도 합니다. 다른 분이 없는 자격증을 내가 소유하고 있다는 생각만 해도 뭔가 안전감이 느껴지지 않나요? 더는 시간낭비하지 말고ITExamDump의Cisco인증 350-040덤프로Cisco인증 350-040시험에 도전해보세요.
ITExamDump전문가들은Cisco 350-040인증시험만을 위한 특별학습가이드를 만들었습니다.Cisco 350-040인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게Cisco 350-040인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다
시험 번호/코드: 350-040
시험 이름: Cisco (CCIE Storage Networking)
ITExamDump의 Cisco인증 350-040시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 Cisco인증 350-040덤프가 신뢰성을 다시 한번 인증해주는것입니다. Cisco인증 350-040시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 Cisco인증 350-040덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.
350-040 덤프무료샘플다운로드하기: http://www.itexamdump.com/350-040.html
NO.1 What Fibre Channel transport functions can be found at the FC-2 level?
A. Exchange Operation, Information Unit, and Sequence
B. Session, Exchange, and Information Unit
C. Sequence, Frame, and Flow Control
D. Sequence, Frame, and Information Unit
E. Exchange Management, Link Control, and Flow Control
Answer: C
Cisco 350-040 350-040 350-040
NO.2 Which three of these statements about the E_D_TOV are correct? (Choose three.)
A. It is a timer with a default value of 100 ms that is used by the receiver logic to detect loss of
synchronization.
B. It is a timer with a default value of two seconds that is used for detecting protocol error conditions.
C. It is a timer used as the timeout value for determining when to reinstate a Recovery_Qualifier.
D. During fabric login, it is negotiated by the N_Port and the fabric as one of the common service
parameters exchanged.
E. It represent a limit on the amount of time within which an action can be taken after the transmission of
consecutive data frames within a single sequence.
Answer: BDE
Cisco pdf 350-040 dumps 350-040
NO.3 What is the function of the Link Reset Protocol within the Link Control Facility?
A. it is part of the LIP process
B. it is used only for Class 1 connection removal
C. it is used to arbitrate on loops to recover from loss of synchronization
D. it is used following a link failure and controls the NOS and LOS substates
E. it is used following a link timeout or connection error and controls the LR and LRR substates
Answer: E
Cisco 350-040 350-040인증 350-040자격증
NO.4 Refer to the exhibit. The fabric containing Switch A is merging with the fabric containing Switch B.
Which switch will become the principal switch, and why?
A. Switch A, because its principal switch priority value is lower
B. Switch B, because its principal switch priority value is higher
C. Switch A, because its principal switch WWN is lower
D. Switch B, because its principal switch WWN is higher
E. not enough information has been given
Answer: A
Cisco기출문제 350-040 dumps 350-040시험문제 350-040자격증
NO.5 Which two of these are effects of a BF SW_ILS? (Choose two.)
A. It causes a disruptive reconfiguration of the fabric.
B. It causes a non-disruptive reconfiguration of the fabric.
C. It causes a new principal switch selection to happen.
D. It causes all the assigned addresses in the fabric to be changed, while avoiding traffic loss by holding
data traffic.
E. It helps to resolve overlapping domain identifiers.
Answer: BC
Cisco자료 350-040 350-040 350-040 dumps
NO.6 Is the iSNS client supported on VRRP interfaces?
A. yes
B. no
C. only when the storage_services_enabler_pkg license is enabled on the switch
D. only on Cisco IPS line cards
Answer: B
Cisco 350-040 350-040 pdf
NO.7 If a Fibre Channel interface is receiving an NOS pattern on its interface, what pattern will the interface
be transmitting?
A. OLS
B. LR
C. LRR
D. IDLE
E. NOS
Answer: A
Cisco 350-040 dumps 350-040기출문제 350-040자격증 350-040
NO.8 What set of primitive signals is valid for arbitrated loop?
A. NOS, LOS, LR, LRR
B. SOF, EOF, ABTS, ACK
C. LIFA, LIPA, LIHA, LISA
D. LIP, LR, LRR, SOF
E. CLS, OPN, ARB
Answer: E
Cisco 350-040최신덤프 350-040덤프 350-040자격증 350-040
NO.9 Can Cisco Fabric Services be used to distribute iSCSI initiator configurations?
A. yes
B. no
C. only when the SAN_EXTN_OVER_IP_18_4 license is installed on the switch
D. only when ENTERPRISE_PKG is installed on the switch
Answer: A
Cisco인증 350-040시험문제 350-040 350-040최신덤프
NO.10 Which of these is used to identify the special characters used in Fibre Channel encoding?
A. K28.5
B. 8B/10B
C. 3B/4B
D. D28.5
E. idle
Answer: A
Cisco 350-040기출문제 350-040 350-040 pdf 350-040
NO.11 What is the correct configuration to place initiator ABC.icq into VSANs 3 and 66 exclusively?
A. iscsi initiator name ABC.iqn
vsan 3 66
B. iscsi initiator name ABC.iqn
no vsan 1
vsan 3 - 66
C. iscsi initiator name ABC.iqn
no vsan 1
vsan 3
vsan 66
D. iscsi initiator name ABC.iqn
vsan member vsan 3
vsan 66
E. iscsi initiator name ABC.iqn
vsan member vsan 3,66
Answer: C
Cisco 350-040 dump 350-040 350-040시험문제
NO.12 The Class 2 class of service always uses end-to-end acknowledgments (ACK, BSY or RJT) for every
data frame. What else is true of Class 2?
A. It is an "unreliable" datagram service that does not guarantee fixed latency or in-order delivery.
B. It is a "reliable" datagram service that guarantees fixed latency and in-order delivery.
C. It is a "reliable" datagram service that does not guarantee fixed latency but guarantees in-order
delivery.
D. It is a "reliable" datagram service that does not guarantee fixed latency or in-order delivery.
Answer: D
Cisco기출문제 350-040 dump 350-040시험문제
NO.13 What is the purpose of the Open Fiber Control system?
A. It defines the flow control mechanism for Fibre Channel.
B. It defines the mechanism by which Fibre Channel switches communicate with Gbics.
C. It defines a safety mechanism for shutting down laser data links.
D. It defines the distance limitations for different types of lasers.
E. It specifies the maximum bit error rate for Fibre Channel links.
Answer: C
Cisco 350-040 350-040 pdf 350-040 350-040
NO.14 Which two statements are true? (Choose two.)
A. Fabric logins are sent to destination FC-ID 0xFFFFFA.
B. Fabric logins are sent to destination FC-ID 0xFFFFFC.
C. FSPF HLO packets are sent from source FC-ID 0xFFFFFD.
D. FC-ID 0xFFFFFA is reserved for the management server.
E. Name server logins are sent to destination FC-ID 0xFFFFFD.
Answer: CD
Cisco기출문제 350-040 350-040시험문제 350-040 350-040 dump
NO.15 Fibre Channel Protocol is a protocol consisting of several layers. What are these layers, in order from
FC-0 to FC-4?
A. Media, Encode and Decode, Framing and Control, Common Services, Upper Level Protocol
B. Encode and Decode, Media, Framing and Control, Common Services, Upper Level Protocol
C. Framing and Control, Encode and Decode, Media, Common Services, Upper Level Protocol
D. Upper Level Protocol, Common Services, Framing and Control, Encode and Decode, Media
E. Media, Framing and Control, Encode and Decode, Common Services, Upper Level Protocol
Answer: A
Cisco 350-040 350-040 dump 350-040
NO.16 Which three of these are attributes of the 8B/10B encoding scheme used by Fibre Channel? (Choose
three.)
A. facilitates a sufficient number of one-to-zero transitions to enable clock recovery
B. maintains DC balance
C. detects all transmission errors
D. provides variable bit, byte, and word rates
E. generates special characters beyond the eight-bit code space
Answer: ABE
Cisco자격증 350-040 350-040인증 350-040 350-040 pdf
NO.17 Which two of these statements about the R_T_TOV are true? (Choose two.)
A. It is a timer with a default value of 100 ms that is used by the receiver logic to detect loss of
synchronization.
B. It is a timer with a default value of 100 ms that it is used for detecting protocol error conditions.
C. Its values is two times that of E_D_TOV, and it is used as the timeout value for determining when to
reinstate a Recovery_Qualifier.
D. It is negotiated between the N_Port and the fabric during the fabric login as one of the common service
parameters exchanged.
E. It is used to time events occurring on a single link.
Answer: AE
Cisco시험문제 350-040 dumps 350-040 350-040
NO.18 In Cisco MDS, how is a pWWN assigned to a dynamically assigned iSCSI?
A. by the system
B. by the user in the configuration of the iSCSI target
C. by the iSCSI host
D. created with iSCSI host name, iSCSI driver, and Connection ID
E. by the storage system attached to Fibre Channel
Answer: A
Cisco인증 350-040최신덤프 350-040자료
NO.19 Which configuration command enables all discovered storage to be available for iSCSI?
A. iscsi virtual-target all
B. iscsi target enable fc
C. fc-target import iscsi
D. enable fc targets dynamic
E. iscsi import target fc
Answer: E
Cisco 350-040 350-040자격증 350-040자격증 350-040시험문제 350-040
NO.20 What ordered set is used to determine the class of a frame?
A. COF
B. SYN
C. SOF
D. TYP
E. LIP
Answer: C
Cisco기출문제 350-040 350-040자료 350-040
NO.21 Which two events will trigger a port to start a Link Initialization Protocol procedure? (Choose two.)
A. the power is turned on
B. a LOGO ELS command is received
C. an internal reset is performed
D. an interface SHUT command is issued
E. an RSCN is received
Answer: AC
Cisco 350-040 350-040자료
NO.22 During principal switch selection and domain ID assignment, all frames are flooded to a destination ID
of what well-known Fibre Channel address?
A. FF.FF.FA
B. FF.FF.FB
C. FF.FF.FC
D. FF.FF.FD
E. FF.FF.FE
Answer: D
Cisco자격증 350-040 350-040자료
NO.23 Which three of these Fibre Channel words are known as primitive signals? (Choose three.)
A. NOS
B. R_RDY
C. CLS
D. LIP
E. IDLE
Answer: BCE
Cisco최신덤프 350-040 350-040 350-040 pdf 350-040 350-040 pdf
NO.24 What SW_ILS frame is used to perform principal switch selection?
A. RDI
B. DIA
C. EFP
D. ELP
E. ESC
Answer: C
Cisco덤프 350-040 350-040
NO.25 Which of these TCP ports does iSNS use?
A. 3205
B. 3225
C. 3226
D. 3325
Answer: A
Cisco dumps 350-040 350-040 350-040시험문제
NO.26 The Domain Identifier Assigned (DIA) SW_ILS command indicates which two of these? (Choose two.)
A. a principal switch has been selected and the upstream neighbor switch has been assigned a domain
identifier
B. the principal switch selection and address assignment phase has been completed and the fabric is
operational
C. the receiving switch can proceed to request a domain identifier
D. the principal switch selection has been started, but a principal switch has not been identified yet
E. a Request Domain Identifier SW_ILS frame has been received by the principal switch
Answer: AC
Cisco 350-040 dump 350-040기출문제
NO.27 What Fibre Channel header field indicates the frame is a Link Control frame?
A. R_CTL
B. CS_CTL
C. TYPE
D. F_CTL
E. DF_CTL
Answer: A
Cisco 350-040덤프 350-040 350-040
NO.28 What makes the R_CTL field valuable to Extended Link Services?
A. It uses hex'03' for all request frames and hex'02' for all reply frames.
B. It uses hex'02' for all request frames and hex'03' for all reply frames.
C. It uses hex'00' for all request frames and hex'01' for all reply frames.
D. It uses hex'02' for all request and reply frames (the ILS request and reply frames are not differentiated
by the R_CTL field).
E. It does not have a fixed value and the value depends on the specific Internal Link Service.
Answer: B
Cisco자료 350-040자격증 350-040자격증 350-040 pdf 350-040인증
NO.29 All of these are functions of LIP except which one?
A. reinitialize a loop
B. perform passive attachment to loop
C. indicate loop receiver failure
D. indicate which port to reset on loop
E. acquire an AL_PA
Answer: B
Cisco기출문제 350-040자격증 350-040 350-040
NO.30 In which of these situations will a fabric zone merge failure occur between fabric A and fabric B?
A. the active zone sets in both fabric A and fabric B are an exact match before the merge is attempted
B. the active zone set in fabric A has more zones than the active zone set in fabric B
C. a zone in fabric A contains three members, while a zone with the same name in fabric B contains four
members
D. zone names used in fabric A are 10 characters, while the zone names in fabric B contain fewer than 10
characters
E. a zone name in fabric A is different from a zone name in fabric B but the zone members in the two
zones are the same
Answer: C
Cisco 350-040 350-040 pdf 350-040 350-040
IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Cisco인증 350-040덤프로Cisco인증 350-040시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
댓글 없음:
댓글 쓰기